Mesh Maze Blender Add-On

I've completely rewritten my Maze any Mesh Sverchok scripted node as a standalone Blender add-on. It's available here.

This add-on runs a recursive back tracker maze algorithm over the selected part of any mesh to produce a maze.

A Blender mesh structure can be seen as equivalent to the grid of cells and list of links used as the data structure for 2D mazes (for example by Jamis Buck in his book "Mazes for Programmers").

Here the mesh vertices are equivalent to cells and the mesh edge connections define the cell neighbors. A maze carving function can then return a subset of the edges that define the path of a maze through the mesh.

round cube maze

The add-on can be installed in the normal way by downloading the zip file from the github repository, then File -> User Preferences -> Add-ons -> Install from File...

Once installed and enabled the add-on can be found in Edit Mode on the Specials W menu, or using the Spacebar menu to search for maze.

After carving the maze along the edges, the add-on (by default) bevels all the edges in the selection to give the maze path some width and then extrudes the walls of the mesh outward to give the maze some height.

moebius maze

Maze Parameters

Changing the Random Seed parameter will recalculate a different maze on the same selection.

The Braid defines whether the maze has dead ends. The higher the value of Braid the less dead ends and the more loops or alternative paths in the maze.

The Boundary Wall Type is only applicable if part of the mesh is selected to run the maze on, or the mesh has a boundary (for example a grid mesh). This parameter sets the outer wall of the maze to Thin, Thick or None.

Advanced Options adds some extra parameters to the Path and Wall Parameters that effect the bevel and extrude operators.

Path Parameters

Bevel Amount Type sets how the amount slider effects the bevel or path width. See the bevel operator documentation for details.

The Path Width sets the width of the path. If set to zero only the edges of the maze within the origina l meash are selected, no bevel or extrude takes place.

The Clamp Overlay and Loop Slide parameters are passed straight to the bevel operator.

Wall Parameters

Offset Relative - scales the offset relative to the surrounding geometry.

Extrude - gives the height of the maze walls.

Offset Even - scales the offset to give more even thickness to the top width of the walls.

Thickness - narrows the top of the wall to give a tapered profile.

Outset - if the walls are tapered the tapered part extends into the path area.

large mesh

Large meshes

The mesh maze add-on takes about 8 seconds (on my machine) to generate a maze on an icosphere with ~10 000 vertices. It has been optimized so that the maze path is regenerated if the random seed or braiding values are changed but not for changes to the path width or wall height.

maze 3d